ML186FB 10 HP diesel power tiller: MLBE published model data
The figures below are extracted from MLBE’s existing model descriptions and technical tables. They must be matched to the ordered equipment and do not claim to be independently measured field performance.
| Model-specific feature | Published reference |
|---|---|
| Engine | ML186FB, 418 cc diesel; output rating pending confirmation because the published power figures are inconsistent |
| Tilling width and minimum depth | 1,350 mm and at least 100 mm listed |
| Blades | 4+1 groups, 40 blades, with side disc |
| Drive / gearing | #32 six-speed gearbox with low/high ranges |
| Starting / net mass | Recoil or electric start as ordered; 122 kg net |
Field-use evidence and fitment
The 1,350 mm width belongs to the supplied 40-blade configuration; it is not proof of a given hourly cultivated area. The listed depth is a lower bound, not a soil-by-soil performance curve. Compare with the ML178F and ML1350DE only after confirming the blades, gearbox version and actual field conditions.
Compare with the ML178F narrower diesel tiller. To prepare an independently useful cultivation test, record soil texture, moisture, initial compaction, blade arrangement, travel gear, measured working depth, engine rpm and cultivated area over time. These are suggested measurement fields, not MLBE test results.
Check the MLBE product manuals and request matching spare-parts drawings, an attachment fitment record and maintenance intervals from MLBE technical support. For a confirmed factory configuration enquire directly by email.
Choosing the ML186FB working configuration
The ML186FB combines a listed 1350 mm cultivation width with a low/high-range gearbox. For open seedbeds, compare coverage width with the time spent turning and repositioning. For orchard work, check the assembled blade width against tree spacing and irrigation lines before selecting the attachment package.
Configuration checklist
- Describe soil condition, crop or row spacing, working width and the intended cultivation task.
- Identify the blade set, transport wheels, depth-control arrangement and the connector for each proposed implement.
- Separate standard equipment from optional attachments and confirm the assembled operating and transport dimensions.
Does the deepest setting always give the best cultivation?
No. Working depth should follow the crop, soil condition and cultivation purpose. Extra depth increases the load and may bring unsuitable subsoil into the seedbed. Use the approved depth-control procedure and avoid forcing the machine through obstructions.
Operation and service planning
Inspect the working area for stones, wire and other obstructions. Avoid cultivation when soil is too wet to work without smearing or compaction. Select the approved depth and gear for the conditions. Stop and isolate the machine, and wait for all movement to cease before clearing or changing attachments.
For the applicable operating instructions or parts reference, send the complete model and production identification to MLBE technical support. The MLBE document centre helps identify the relevant resources. Confirm document revision, included accessories, packaging and agreed support terms for the supplied configuration.
Compare ML178F and ML1350DE for related MLBE options. For factory orders, provide quantities, destination, configuration and artwork requirements through MLBE dealer and OEM supply.
MLBE ML186FB 10HP Diesel Power Tiller
Who is this model for?
The ML186FB diesel power tiller combines a 418 cc, 10 HP engine with a #32 six-speed gearbox for wider cultivation and soil preparation. Its 1350 mm working width, 40-blade set and low/high speed ranges suit farms and agricultural dealers seeking a gear-driven diesel machine.
Confirm the required starting system, blade set and attachment compatibility for the destination market before ordering. For configuration-specific documents, contact MLBE technical support.
Parameter
| Engine Model | ML186FB Diesel |
| Displacement | 418 cc |
| Maximum Output | Confirm power rating and test speed for the supplied engine |
| Starting System | Recoil start / Electric start |
| Tilling Width | 1350 mm |
| Tilling Depth | ≥100 mm |
| Tilling Blades | 4+1 groups, 40 pcs, with side disc |
| Transmission Mode | #32 6-speed gearbox |
| Shifting Gears | 1, 0, 1, 2; L speed / H speed |
| Main Clutch Type | Friction plate |
| Packing Dimensions | 1050×570×780 mm |
| N.W./G.W. | 122 / 132 kg |
