Compare MLBE petrol water pumps and sprayer configurations. Choose the pump type and connection size for the required flow, head and water conditions. Factory and OEM supply. MOQ: 50 units.

Contact MLBE directly

Compare models and key specifications

Figures and configurations vary by model. Open the product page for the full specification and confirm the supplied configuration in your quotation. Maximum flow and maximum head are separate operating limits; request the required flow at the actual working head.

ML154F Petrol Engine with Sprayer

Displacement
105 cc
Working pressure
2.0–4.0 MPa (20–40 bar), with pressure gauge + pressure regulating valve
Starting System
Recoil (hand-pull) start

Find model information and documents for this range

Buying advice, OEM orders and technical resources

MLBE manufactures petrol water pumps for importers and dealers comparing portable irrigation and agricultural water-transfer equipment. MOQ: 50 units. OEM supply is supported. Start with the flow needed at the delivery point, then compare connection size, working head, engine specification and pump-body construction.

Request a factory quotation — tell us your destination country, selected models and quantity. Samples are chargeable.

Compare petrol irrigation and high-lift pump models

The selected models below cover 2-inch, 3-inch and 4-inch connections. Follow each model link for its complete specification and order-enquiry details.

Model Inlet / outlet Max. flow (m³/h) Max. head (m) Configuration
MLWP50G 2 inch / 50 mm 19.8 60 Cast-iron pump body
MLWP50 2 inch / 50 mm 36 28 Aluminium-body transfer model
MLWP80 3 inch / 80 mm 60 26 Aluminium-body transfer model
MLWP100 4 inch / 100 mm 90 26 4-inch model; ML188F engine
MLWP100-S 4 inch / 100 mm 68 20 4-inch model; ML170FB engine
MLWP50H 2 inch / 50 mm 30 50 High-lift range
MLWP80H 3 inch / 80 mm 38 65 High-lift range

Compare at the working head: Maximum flow and maximum head are separate endpoints and must not be treated as simultaneous performance. The MLWP50G figure of 19.8 m³/h is equivalent to 330 L/min or 19,800 litres per hour. Request the performance curve and test conditions for the selected model.

How to choose a petrol water pump for irrigation

  • Water and installation: specify the water type, any solids, suction conditions, hose diameter and length, elevation change and outlet-pressure requirement.
  • Model fit: compare the required flow at the actual head, pump-body material, engine, starting system and transport weight.
  • Dealer support: confirm fittings, manuals, packaging and model-matched seals, impellers and engine service parts.

Use the agricultural water pump selection guide for Indian importers and dealers to prepare a technical enquiry, or review the water pump types guide when comparing pump designs.

Wholesale and OEM enquiries

The minimum order quantity for water pumps is 50 units. MLBE supports OEM supply. Send your destination market, selected models, quantity for each model and required delivery schedule. Include any requests for colours, branding, labels or cartons so that the customisation scope can be reviewed.

Confirm the proposed model mix, packing dimensions, gross weight, included accessories, supply schedule and applicable model-specific documentation in the quotation. A pictured hose or fitting should not be assumed to be included. See dealer and OEM supply for the purchasing process.

Request a petrol water pump quotation with your application details. For model identification, manuals and spare-parts enquiries, use MLBE technical support and the catalogue and user manual resources.

Browse the model and document index to identify the correct equipment before requesting manuals or parts information.

Petrol Water Pump Demonstrations

Explore original MLBE Machinery videos matched to their stated models. Videos are visual references, not independently verified performance tests; confirm variants, electrical or hydraulic specifications and accessories with our technical team.

View all MLBE product videos →

Default sorting