Planning bulk transfer with MLWP150
MLWP150 is listed with 6-inch connections, so the order should include a practical plan for moving and securing the hoses as well as the pump. Identify the source level, discharge elevation and operating duration. These details help separate a high-volume transfer requirement from a high-pressure requirement.
Configuration checklist
- Record the required flow at the delivery point and the vertical difference between the water source and outlet.
- Specify suction and delivery hose diameters, lengths, bends and couplings, together with water quality and expected debris.
- List hoses, strainer, seals and connectors individually so included equipment can be distinguished from optional items.
Does a larger engine guarantee more flow at every installation?
No. Pump design and the resistance of the connected system determine the operating point. Compare the performance of the exact MLWP150 configuration at the required head rather than selecting from engine size alone.
Operation and service planning
Install the pump securely and follow the specified priming procedure. Keep the intake clear, check joints for air or water leakage and never run the pump dry. Stop the engine, allow it to cool and release system pressure safely before maintenance.
The MLWP150 pairs a 6-inch pump with the listed 456 cc ML192F engine. Record both assembly identities, hose-connection details and the operating flow/head requirement. Include water conditions when requesting impeller or seal references, and confirm the relevant engine and pump manuals for this larger unit. Contact MLBE technical support with these details. The MLBE document centre helps identify the relevant resources. Confirm document revision, included accessories, packaging and agreed support terms for the supplied configuration.
Compare MLD150 and MLWP50 for related MLBE options. For factory orders, provide quantities, destination, configuration and artwork requirements through MLBE dealer and OEM supply.
MLWP150 6-inch petrol pump: MLBE hydraulic specifications and duty-point selection
Data source: MLBE’s published model specification. Values marked ‘maximum’ describe individual published endpoints, not measured combined-duty performance.
| Model / feature | Published specification |
|---|---|
| Inlet / outlet | 150 mm (6 in) |
| Published maximum flow | 135 m³/h |
| Published maximum head | 20 m |
| Published suction lift | 5 m |
| Engine | ML192F petrol, 456 cc; listed 10.5 kW at 3,600 rpm |
| Net mass / dimensions | 75 kg; 825 × 595 × 675 mm |
Hydraulic selection and evidence
MLWP150 is a higher-volume option with a 150 mm connection. The 135 m³/h capacity and 20 m maximum head are separate test endpoints: buyers must request flow at the actual system head, including friction losses over the whole discharge run. Its 75 kg listed weight also requires a realistic handling plan.
For a properly documented acceptance test, ISO 9906 describes hydraulic performance acceptance testing for rotodynamic pumps. This reference is a test-method guide, not a claim that MLBE has certified this model to ISO 9906. Obtain the factory test points (flow, head, speed and conditions), curve and model-matched spare-parts drawing for the exact supplied version.
Compare MLWP50 / MLWP80 smaller-diameter irrigation pumps. See the MLBE manual library, the pump maintenance guide and technical support for service-parts information. Send quantity, destination, water source and required duty-point flow to MLBE for a technical quotation.
MLWP150 6-inch petrol water pump
The MLBE MLWP150 is a centrifugal water pump for buyers comparing higher-volume irrigation and water-transfer equipment. It combines 6-inch (150 mm) inlet and outlet connections with an ML192F 456 cc petrol engine, recoil starting, an aluminium-alloy pump body and a mechanical seal.
Compare flow, head and installation size
The listed maximum flow is 135 m³/h and maximum head is 20 m. These figures describe separate performance endpoints. Request the flow available at the actual working head, including delivery-level changes and hose losses.
The listed net weight is 75 kg and the dimensions are 825 × 595 × 675 mm. Allow for equipment handling and space around the pump and hose connections when planning the site.
Explore the petrol water pump range and agricultural water pump selection guide. For configuration-specific documents, contact MLBE technical support.
MLWP150 specifications
| Model | MLWP150 |
| Pump Type | Centrifugal Pump |
| Inlet/outlet size | 6″ (150 mm) |
| Maximum total head (m) | 20 |
| Maximum flow rate (m³/h) | 135 |
| Suction height (m) | 5 |
| Engine model | ML192F |
| Engine displacement (cc) | 456 |
| Rated engine power (kW / rpm) | 10.5/3600 |
| Starting system | Recoil start |
| Fuel tank capacity (L) | 6.5 |
| Net weight (kg) | 75 |
| Dimensions (L × W × H, mm) | 825*595*675 |
Prepare the water-transfer installation
Specify the water source, required flow at the working head, 6-inch hose lengths, connector types and strainer requirements. Confirm permitted liquid conditions and the supplied fittings before ordering. Fuel consumption and operating duration should be confirmed for the intended load; the 6.5-litre tank capacity alone does not establish run time.
