MLBE MLGC60-N 600 mm gear-driven stubble mower: model-level MLBE technical evidence
Source: MLBE published specification by exact model or range. These are reference values for purchasing, not independent measured tests of the production unit being ordered.
| Model / technical item | MLBE published information |
|---|---|
| Cutting width / working height | 600 mm / listed 50–80 mm |
| Engine | Petrol engine, published maximum power 6.6 kW at 3,600 rpm |
| Drivetrain | Gear drive, 3 forward / 1 reverse gears |
| Cutting assembly | 36 serrated blades in 12 groups |
| Travel and wheels | 500 mm wheel track, listed travel 50–60 m/min |
| Net / gross mass | 100 / 110 kg |
Fitment, performance and safety verification
MLGC60-N has a dedicated 600 mm gear-drive configuration, not the belt-transmission of ML-GC600. Cutting height and speed vary with blade condition and vegetation. A measured cutting-capacity trial should record vegetation type, stem thickness, slope/terrain and fuel consumption before claims of hourly area coverage.
Compare ML-GC belt-drive mower family and consult model selection / technical guidance. For a complete factory record request the appropriate manual, genuine parts diagram, machine safety information and configuration-specific test evidence via MLBE technical support. Send your exact model, quantity, destination and intended use to MLBE factory sales.
Planning vegetation clearance with MLGC60-N
The MLGC60-N is listed with a 600 mm working width and a direct gear-drive layout. Check row clearance, turning space and vegetation density before choosing it for orchard floors or field edges. The condition of the cutting components matters as much as travel speed when working through uneven growth.
Configuration checklist
- Describe vegetation type, density, ground conditions and the required cutting height.
- Measure rows, access routes and turning areas using overall machine dimensions, not working width alone.
- Confirm the cutting assembly, guards, replacement blades and transmission service parts for the exact model.
Is a stubble mower the same as a finishing lawn mower?
They serve different mowing tasks. Select MLGC60-N around the intended grass, weeds or approved crop residue and the required finish. For a regularly maintained lawn with collection requirements, compare the MLBE lawn mower range.
Operation and service planning
Clear stones, wire and debris from the work area and keep bystanders away from the discharge path. Follow the approved instructions for terrain and mowing direction. Stop the engine and wait for blades to stop before clearing the deck or changing components; isolate the machine before maintenance.
For the applicable operating instructions or parts reference, send the complete model and production identification to MLBE technical support. The MLBE document centre helps identify the relevant resources. Confirm document revision, included accessories, packaging and agreed support terms for the supplied configuration.
Compare ML-GC450 and ML20S for related MLBE options. For factory orders, provide quantities, destination, configuration and artwork requirements through MLBE dealer and OEM supply.
600mm Gear-Driven Stubble Mower for Dense Grass and Crop Residue
The MLBE MLGC60-N is a walk-behind stubble mower with a direct gear-drive system and a 600 mm working width. Its petrol engine delivers up to 6.6 kW at 3600 rpm, providing a practical power range for cutting weeds, grass and light crop residue.
Three forward gears and one reverse gear help the operator match travel speed to vegetation and ground conditions. The cutting system uses 36 serrated blades arranged in 12 groups, with a working height of approximately 50-80 mm.
Mechanical Drive for Repeated Field Work
The gear-driven layout provides direct power transmission for orchard maintenance, field-edge clearing and residue management. Contact MLBE with vegetation type, terrain and desired working height to confirm the appropriate machine configuration.
Technical Specifications
| Specification | Value |
|---|---|
| Model | MLGC60-N |
| Working width | 600 mm |
| Wheel track | 500 mm |
| Travel speed | 50-60 m/min |
| Working height | 50-80 mm |
| Drive | Gear drive |
| Gears | 3 forward / 1 reverse |
| Engine | Petrol engine |
| Maximum power | 6.6 kW at 3600 rpm |
| Fuel tank | 6.5 L |
| Engine oil capacity | 1.1 L |
| Blades | 36 serrated blades in 12 groups |
| Packing dimensions | 1300 x 700 x 660 mm |
| Net / gross weight | 100 / 110 kg |
| Loading quantity | 72 units / 40HQ |
Compare MLBE stubble mowers, use the Stubble Mower Buying Guide for Farms and Dealers to compare drive type, working width, cutting height and field use, read the MLBE power tiller guide, review the catalogue and user manuals, or contact MLBE for specifications, MOQ and distributor enquiries.
MLGC60-N FAQ
What is the working width?
The MLGC60-N has a 600 mm working width.
What engine and output are listed?
The page lists a petrol engine with maximum power of 6.6 kW at 3600 rpm.
How many gears does the machine have?
It is listed with three forward gears and one reverse gear.
What cutting system is used?
The mower uses 36 serrated blades arranged in 12 groups, with a listed working height of approximately 50-80 mm.
