ML154F performance and configuration
Evidence level: MLBE model-table figures, not a reproduced dynamometer test or independently validated torque curve.
| Technical item / model | Published data |
|---|---|
| Bore × stroke | 54 × 46 mm; 100 cc displacement |
| Published net power | 1.3 kW at 3,600 rpm |
| Published net torque | 3.2 N·m at 2,500 rpm |
| Fuel and oil | 1.4-litre fuel tank; 0.4-litre engine oil capacity |
| Fuel consumption | Published ≤450 g/kWh; measurement condition not provided |
| Starting and mass | Recoil start; net/gross 9/10 kg |
Correct rating and fitting interpretation
The ML154F bare engine and the ML154F-equipped plunger-sprayer assembly are separate products and must not share equipment weight or shaft coupling assumptions. The single torque/power values do not constitute a tested rpm curve. Request output-shaft profile, mounting dimensions and allowable driven load for OEM integration.
ISO 3046-3 covers measurement techniques for engine-performance parameters. This is a technical reference, not a statement that this MLBE model has been tested or certified to that standard. The MLBE source model listing provides the quoted reference figures.
Refer to MLBE engine maintenance and the manual library. For an approved engine/shaft configuration, parts drawing, test record and OEM quotation, contact MLBE technical support with the engine model, application, rated speed and shaft requirements.
ML154F 100 cc petrol engine
The MLBE ML154F is a compact single-cylinder petrol engine with a listed 1.3 kW net output at 3600 rpm. Its published specification includes recoil starting, a 1.4-litre fuel tank and a 9 kg net weight. Use the dimensional and performance data below when discussing integration into compatible compact equipment.
Planning a compact ML154F installation
For the standalone ML154F petrol engine, check the driven equipment’s shaft connection and space for the recoil starter, fuel filling and routine service. Keep the standalone engine enquiry separate from an integrated engine-and-sprayer assembly, even where related model naming is used.
Configuration checklist
- Provide a dimensioned mounting layout and the required shaft diameter, length, keyway or taper.
- Confirm shaft rotation, operating speed, driven load and available space for the starter, air intake, exhaust and service access.
- Identify controls, coupling and starting equipment separately; similar engine displacement does not prove direct replacement compatibility.
Does the engine model prove that two complete machines share parts?
No. A complete machine can include different couplings, controls, pumps or installation parts. Identify both the engine and the host equipment before requesting a replacement component.
Operation and service planning
Use the lubricant, service intervals and adjustment procedures specified for the supplied engine. Check oil level, air-filter condition, fasteners and fuel connections as instructed. Stop and isolate the engine before servicing, and keep hot exhaust surfaces and rotating equipment appropriately guarded.
For the applicable operating instructions or parts reference, send the complete model and production identification to MLBE technical support. The MLBE document centre helps identify the relevant resources. Confirm document revision, included accessories, packaging and agreed support terms for the supplied configuration.
Compare ML168F and ML154F engine with sprayer for related MLBE options. For factory orders, provide quantities, destination, configuration and artwork requirements through MLBE dealer and OEM supply.
Explore the petrol engine range and petrol engine troubleshooting guide. For configuration-specific documents, contact MLBE technical support.
Technical specifications
| Model | ML154F |
| Engine Type | Single Cylinder |
| Bore×Stroke (mm) | 54×46 |
| Displacement (cc) | 100 |
| Compression Ratio | 6.8:1 |
| Net Power (kW/rpm) | 1.3/3600 |
| Net Torque (N·m/rpm) | 3.2/2500 |
| Starting System | Recoil Start |
| Fuel Tank Capacity (L) | 1.4 |
| Engine Oil Capacity (L) | 0.4 |
| Fuel Consumption (g/kWh) | ≤450 |
| Dimensions (L×W×H mm) | 295×290×360 |
| N.W/G.W (kg) | 9/10 |
